 |
||||||||||||||||||||
 |
||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
||||||||||||||
 |
 |
 |
 |
 |
 |
|||||||||||||||
Parts IdentifyingVespa Side Panels |
Pistons |
|||||||||||||||||||
 |
Vespa VSX1T
piston: 66.3 mm - 2 main transfer with a
small "boost" transfer. Transfers are off axis from gudgeon pin.
|
|||||||||||||||||||
 |
Vespa VBA1T piston: 56.8 mm - 2 main ports and a deflector type head. Transfers are the same on both sides. | |||||||||||||||||||
 |
Lambretta Li125 III piston: 51.8 mm - 2 main transfers and a domed head. Transfers are different on both sides. | |||||||||||||||||||
 |
Vespa VSX1T Pinasco 213 kit piston: 2 large main transfers with a small "boost" transfer. | |||||||||||||||||||
 |
Vespa VSX1T Malossi 210 kit piston: 2 large main transfers with a 2 small "boost" transfers across from the exhaust. | |||||||||||||||||||
 |
Lambretta TS1 225 piston: 2 large main transfers with a 2 small "boost" transfers across from the exhaust where the reed valve intake is located. | |||||||||||||||||||
 |
Vespa T5 piston: 1 full cut out with 2 skirt cut aways for the 2 barrel transfers on either side. Thanks to Stefan Onderka for the picture. Click piston for larger image | |||||||||||||||||||